Name: Roll load cells GC2
Brand: Gicam

Roll load cell

Easy to assemble, overload protection, internal amplifier capability 4-20mA / 0-10V, for bearings diameter 28, 32, 35, 40, 42 mm

Click to enlarge image

Material	Stainless steel
Nominal load	25, 50, 100, 200, 400 kg
Limit load	150 % F.S.
Breaking load	300 % F.S.
Supply voltage	Maximum 18 V dc
Output	2 mV/V
Output tollerance	0,1 % F.S.
Zero tollerance	1 % F.S.
Linearity	0,1 % F.S.
Hysteresis	0,05 % F.S.
Reapeatability	0,1 % F.S.
Input resistance	350-360 ohm
Output resistance	350-353 ohm
Insulation resistance	>= 2000 Mohm
Creep (30 Minutes)	0,05 % F.S.
Thermal compensation	-10 / +40°C (14 / +104°F)
Operating temperature	-20 / +70°C (-4 / +158°F)
Temperature deviation zero	0,003 % F.S. / °C
Temperature deviation full scale	0,002 % F.S. / °C
Protection class	IP 54
Connection	Panel male connector CR2R-07APNS
Standard cable length	Optional: Loose female connector CR2P-07ASNS-10 , connection cable 4 x 0,25 mm2 (length to be defined)

General precautions to be followed in the installation and assembly of load cells:

Follow the direction of application of force on the load cell
Do not exceed the limits of the temperature as indicated in the data sheet
Do not remove labels from the load cell
Adequately protect the cables with sleeves or channels
Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
Do not carry out any welding on the mechanical structure after mounting the load cell
Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
Protect load cell from any dust accumulation with any appropriate means

Type	CONNECTOR 7P SCC2A-16
Length	5 m (body lead cell not connected shield)
Pin 1	+ OUT
Pin 2	- OUT
Pin 3	NC
Pin 4	NC
Pin 5	NC
Pin 6	+ IN
Pin 7	- IN

Roll load cells GC2